|
|
 |
|
| |
ULTRATAP® BLOCKLINER BL650 |
Whether the finished application is to be a decorative wallcovering or the paint of your choice, the ULTRATRAP coating on a roll Block liner is a new time saving, cost effective alternative to skim coating.
Characteristics & Technical Properties
| |
- Alternative to skim coating for walls and ceilings.
- Ready for painting, wallcovering application, or knock down application
- Covers masonry, tile, knock-down texture, plaster walls, cracks, paneling, brick, damaged dry wall, or other problem surfaces
- Easy to install
|
- Minor surface prep
- Class A fire rated
- Made of latex coated non-woven fiberglass substrate
- Thickness: 0.7mm
- Weight: 650 g/m2 or 19.17 oz./sq. yd.
- Roll size: 39" (1 meter) wide x 10.9 yds. (10 meters long) or 107.6 sq. ft./roll.
|
Installation instructions
Wall Restoration / Painter's Mat |
| The Wall Restoration/Painter's Mat is a non-woven, fiberglass mat that can be used as a reinforcement material or as a wallcovering liner and is used in the glid wall system. As a reinforcement mat to restore cracked plaster walls and ceilings, the mat can be painted to provide a smooth finish. Either latex acrylic paint can be used, or for a more durable finish, use an epoxy paint coating in a wet to wet application. The fiberglass mat does not shrink, stretch or deteriorate, and is dimensionally stable during the hanging process. Available in two thicknesses.
| |
PRODUCT |
#VP35 |
#VPP200 |
THICKNESS |
11 Mils |
20 Mils |
WEIGHT |
1.20 oz/sq. yd. |
5.90 oz/sq. yd. |
ROLLSIZE (same for both)
39" (1 meter) wide x 54 yds (50 meters) long = apprx. 538 sq. ft. |
Installation instructions
For samples and information or where to buy,
call Roos International at 800.888.2776 or 954.429.3883
|
|
|
